Setting up your bearded dragons home well will provide you with easy access to your pet and will lay the foundations to contribute to a long, healthy and enriched life.

Here are six steps to create the best housing setup:

  1. Select the best type of home.
    • Indoors, outdoors and materials (i.e. wood, glass, PVC, acrylic).
  2. Choose the right size of house including meeting minimum regulations for Australian reptile keepers.
  3. Select and set up lights, heating and thermostat.
    • Types of lighting, heating
    • Lamp covers, reflectors, dome fittings
    • Thermostats
  4. Set up monitoring of the environment.
    • Thermometers and thermostats
  5. Choose the best substrates.
  6. Set up the best accessories, the best are free!
    • Set up basking and perching sites. Groundcover and feeding area. Branches, vines, rocks, burrows and hides, food and water bowls.

How to Setup Your Bearded Dragons Home

1. Selecting the Best Home

1.1 Indoor and Outdoor Housing

As pets, bearded dragons are typically kept indoors. This makes it much easier to enjoy their company and control their environment. However, indoor housing is likely to be restricted on size far more than outdoor depending on your residence. On the other hand, access to unfiltered UVB can make up for mistakes or inadequacies of indoor lighting.

Rather than choose from indoors or outdoors, it would be better to provide both. The outdoors enclosure may be a temporary setup only used during appropriate weather.

Can I Keep my Bearded Dragon Outside?

You can keep your bearded dragon outside in the appropriate climate. All their requirements, such as for heat and UVB, still need to be provided only outdoors, those elements are expected to come from the natural environment.

bearded dragons basking outdoor housing
Bearded dragons (Pogona minor minor) basking in the sun. Outdoor housing has been provided multiple basking accessories from rocks and branches ensuring the need to compete for resources is minimised.

One of the major benefits of providing accomodation outdoors is the access to direct unfiltered sunlight can counteract any issues with UVB lighting indoors.

outdoor housing for bearded dragons
Outdoor housing providing shade, hides and basking spots.

Outdoor enclosures can be built in to the environment or be something easily transportable to move around the garden.

mobile outdoor housing for bearded dragon
Mobile outdoor housing created by Rebelle.

1.2 Factors to consider in choice of housing

The following provides a checklist of some basic requirements the housing should meet:

  • How easily it can be cleaned including disinfecting. Outdoor enclosures have different requirements which are discussed in this article.
  • How easily the animal can be accessed. Inadequate access can lead to frustration and will certainly be problematic if the animal is injured or ill.
  • How much room there is to move both vertically. Bearded dragons are semi arboreal, unfortunately something often not taken into consideration. They need branches and perhaps vines to climb.
  • How much floor surface there is to move without objects and room to set up accessories.
  • Access to temperature gradients, humidity levels and lighting cycles suitable for relevant factors including biological and seasonal.
  • Good air circulation especially in climates with high humidity. Two main factors are height of the enclosure and the material used to create the enclosure. Vents should be at the sides and top of the enclosure. Glass enclosures are not generally designed with good air circulation.
  • Free of pests.
  • Free from distress including other bearded dragons.
  • How safe is the animal from cats or other possible sources of harm when you aren’t looking.
  • Surfaces and equipment cannot cause injury including cuts, abrasions and burns.
  • Ease of securing accessories to prevent harm from falls (both accessories falling on the reptile or the accessory falling while the animal is on it).
  • Prevents access to harmful substances.
  • Escape proof.

1.3 What is the Best Type of House for Bearded Dragons?

The best type of house for bearded dragons indoors can be made of wood, melamine and glass. Glass does not provide the same flexibility that wood and melamine do and there are some health concerns that may be exaggerated by glass due to lack of air circulation.

Wood and Melamine Housing

Wood and melamine are great materials for a bearded dragon habitat. However, as it can soak up fluids the surface will likely need some waterproofing.


  • Cheap entry point.
  • Sealed panels (melamine) are easy to clean.
  • Easy to fix accessories securely so they will not fall on the occupant.
  • Easily fix new levels (shelf) within the housing to make greater use of vertical space.
  • Easy to add further ventilation if needed.
  • Some privacy/security provided by solid walls (cannot be seen through).
  • Roof is likely to be solid. Particularly useful where cats are in the house that like sitting on top of warm enclosures. (Mesh tops are not always so robust)


  • Melamine edges and wood require sealing.
  • May be difficult to disinfect the wood well.
  • Readily available sizes are small.
  • The 360 degree view may result in the animal becoming stressed if no protection is provided.
  • Not a good insulator (doesn’t keep heat in well).
  • Some sides of the housing will be solid impacting viewing from multiple angles.
  • Can be heavy.
building your own bearded dragon house out of melamine
Bottom half of a large bearded dragon house being built out of melamine.
Are glass tanks good for bearded dragons?

Glass tanks (aka vivarium) are not necessarily good for bearded dragons. They are very popular which is driven by manufacturers who can mass produce standardised sizes at low cost making them an easy entry point for enthusiasts. However, the potential to impact health in the long term needs to be assessed.


  • Glass doesn’t scratch easily.
  • Waterproof, glass does a fabulous job at keeping in liquids and gasses.
  • 360 degree view of the animal if no barriers are provided.
  • Easily cleaned and disinfected.


  • Traps moisture and gases which can contribute to health issues.
  • Difficult to add further ventilation to. Ventilation is often inadequate for circulating reasonable volumes of air even if the top is made of mesh. Excessive humidity is quite problematic and it is really difficult to reduce excessive humidity, it is best to avoid.
  • Difficult to attach accessories safely. Typically limited to suction caps which do not always stick.
  • Often the readily available sizes are too small.
  • The 360 degree view may result in the animal becoming stressed if no protection is provided.
  • Not a good insulator (doesn’t keep heat in well).
  • Glass reflects and this can cause distress to the bearded dragon when it cannot tell the difference between its own reflection and that of another bearded dragon.
  • Typically come with mesh tops can easily be broken through.

Note: there is additional information relating to glass tanks for bearded dragons below.

cats can break into bearded dragon housing
Cats have been sleeping on the mesh top of the glass housing, attracted to the warmth.
PVC Plastic Cages for Bearded Dragons

Manufacturers are venturing into plastic cages which are a lighter option than any discussed so far. The quality of the plastic cage will vary with supplier.

No one is advertising recycled plastic cages but perhaps in the near future this will become more popular.


  • Waterproof.
  • Keeps in liquids and gasses.
  • Easily cleaned and disinfected.
  • Easy to fix accessories securely so they will not fall on the occupant.
  • Easy to add further ventilation if needed.
  • Some privacy/security provided by solid walls (cannot be seen through).
  • Roof is likely to be solid. Particularly useful was a barrier to cats.


  • Often expensive.
  • Scratch easily detracting from its aesthetic appeal over time.
  • May bend over time or with continued exposure to heat. (This is not necessarily true of a good design with well placed support.)

2. What Size House Does my Bearded Dragon Need?

In Australia reptile keepers must comply with the Code of Practices related to their state which includes the size of housing that must be provided to reptiles. Clearly reptile keepers outside of Australia are not required to follow the regulations, however they make for a well founded guide.

The most generous allowance for minimum size house that bearded dragons must be provided, out of the three states assessed in this article, is set by the Victorian state government at 100 cm long by 80 cm wide (39.3″ long by 23.6″ wide). Queensland adds to that by requiring the height of the housing to be 80 cm tall (31.4″ high).

2.1 Australian State Codes of Practice

Victoria Government requirements for bearded dragons

The Victorian State Government’s Code of Practice for the Welfare of Animals – Private Keeping of Reptiles sets the minimum size house that bearded dragons must be provided is:

  • Length to be at least 2.5 x the lizards length (head to vent)
  • Width to be at least 2 x

For each additional bearded dragon a further 20% floor space must be provided.

For the calculations the bearded dragons size is set to 40 cm from head to vent as this is the length other states have used for sizing. This means the minimum size of housing would equate to 75 cm long by 60 cm wide (39.3″ long by 23.6″ wide). There is no mention directly to height of the enclosure. This article covers height in Housing Height section below.

map of Victoria Australia relating to the Code of Practice for bearded dragon owners
Australian state of Victoria, home to the Pogona barbata (aka Eastern Bearded Dragon) and Pogona vitticeps (aka Inland Bearded Dragon and Central Bearded Dragon).
Image from Wikimedia Commons licenced under the Creative Commons Attribution-Share Alike 3.0 Unported)
Queensland Government requirements for bearded dragons

The Queensland Code of Practice – Captive reptile and amphibian husbandry is quite clear. It states the minimum size house for 2 to 3 bearded dragons is 100 cm by 150 cm x 80 cm (39″ x 59″ x 31″). Note that it does not provide dimensions for a single bearded dragon.

map of Queensland Australia relating to the Code of Practice for bearded dragon owners
Australian state of Queensland, home to the Pogona barbata (aka Eastern Bearded Dragon), Pogona vitticeps (aka Inland Bearded Dragon and Central Bearded Dragon) and Pogona henrylawsoni (aka Dwarf Bearded Dragon, Downs Bearded Dragon, Black-soil Bearded Dragon, Dwarf Bearded Dragon and numerous other names.).
Image from Wikimedia Commons licenced under the Creative Commons Attribution-Share Alike 3.0 Unported)
New South Wales Government requirements for bearded dragons

The New South Wales Code of Practice for the Keeping of Reptiles states that for the Pogona barbata and Pogona vitticeps the minimum floor area must be 0.375m2. In the enclosure size calculations (Appendix B) for the largest of the Pogona species is set at 75 cm by 50 cm (29.5″ by 19.6″). For a second bearded dragon in the same enclosure a further 50% more space needs to be provided.

The enclosures shortest dimension cannot be any smaller than the length of the largest lizard from snout to vent, as is the case for all the Codes of Practice.

map of New South Wales Australia relating to the Code of Practice for bearded dragon owners
Australian state of New South Wales, home to the Pogona barbata (aka Eastern Bearded Dragon) and Pogona vitticeps (aka Inland Bearded Dragon and Central Bearded Dragon).
Image from Wikimedia Commons licenced under the Creative Commons Attribution-Share Alike 3.0 Unported)

2.2 Minimum requirements for size of bearded dragon house

The tables below compare the floor space requirements for bearded dragons for each state against each other.

Looking at the most generous of the states for floor space, Victoria and Queensland are in the lead.

The minimum requirements for the size of house for a bearded dragon in Victoria is 75 cm by 60 cm (29.5″ by 23.6″).

The minimum requirements for the size of house for two bearded dragons together is Queensland with a floor space of 100 cm x 150 cm with a height of 80 cm (39.3″ by 59″ by 31.4″).

Victorian State Government100 cm80 cm1
New South Wales Government75 cm50 cm1
Victorian State Government100 cm80 cm2
Queensland Government*100 cm150 cm80 cm2
New South Wales Government112 cm75 cm2
House sizes requirements for bearded dragons according to Australian Codes of Practice in centimeters
Victorian State Government39.3″23.6″1
New South Wales Government*29.5″19.6″1
Victorian State Government39.3″23.6″2
Queensland Government39.3″59″31.4″2
New South Wales Government*37″29.5″2
House sizes requirements for bearded dragons according to Australian Codes of Practice in inches.

The minimum requirements for the size of housing for bearded dragons are not particularly generous especially when you consider that in their native environment there are days that they can travel hundreds of meters. It will not take much effort to beat the small dimensions with something larger.

“…many companion lizards are housed in minimalistic enclosures where convenience and simply keeping the animal alive is the main priority.”

The Animal Behavior Management Alliance 2015 Annual Conference “See the World through Behavior” , Denmark,

2.3 Small versus Large Housing

Large enclosures and natural accessories will provide a good foundation for encouraging natural behaviours. A poor environment can result in behavioral issues such as self harm, unnaturally increased or decreased appetite and repetitive movements. This can include rostral damage (snout rubbing), glass surfing and so on.

Small environments will:

  • Harbour a higher concentration of pathogens encouraging disease and creating more work for you to clean.
  • Not support a healthy thermal gradient.

There is no limit in the size of house for your bearded dragon indoors or outdoors. Six foot indoor housing is a great starting size, even if you are rearing a juvenile.

There is no need to start a baby bearded dragon off in small sized housing. They are perfectly evolved to be able to care for themselves in the vast expanses of Australia immediately after hatching. Providing the youngster a 6 foot enclosure will not be a problem.

Don’t spend your money on small enclosures for babies and juveniles that will grow out of them faster than you will want to replace the housing. 

2.4 How high should my bearded dragons house be

The height of the housing needs to provide for the bearded dragons, often over looked, semi-arboreal nature.

The bearded dragons species vary in their habitat in the wild and their native territory clearly has some impact on their natural behaviours. We know from research conducted by Wotherspoon that the Pogona barbata is quite semi-arboreal. To accommodates its natural behaviours the height of the housing needs to allow for upright branches.

From the Code of Practices point of view, only Queensland has directly addressed this. Others have been a little more vague by referring to allowing natural behaviours, however they have also placed bearded dragons in the terrestrial basket rather than semi arboreal.

How high the bearded dragons house should be (for Queensland) is 80 cm (31.4″). This height doesn’t provide much allowance for vertical accessories such as branches but it will be sufficient to set up a temperature gradient (heating and lighting section of this article).

“When it comes to space, there is no upper limit. It is far better for a reptile to have more space than it requires, than to require more space and not have it. Unfortunately, most reptile housing appears to based on convenience, budget and, in some cases, ignorance of the true spatial needs of reptiles.

Scales and Tails The Welfare and Trade of Reptiles Kept as Pets in Canada

In conclusion, the best housing for bearded dragons is not a single enclosure but preferably one outdoors that provide uninhibited access to sunlight (shelter and so forth of course) and an indoor enclosure of perhaps melamine and at least 6 foot long.

2.5 Finishing off the case of using a tank for bearded dragons

Quickly back to glass tanks for bearded dragons. Now that we are clearer on the minimum size housing to be provided for bearded dragons we can close this subject off.

Comparing the common glass tank sizes which can be purchased in pet stores against the minimum housing requirements, only a few provide sufficient depth of 26.3 cm (24″). Of course this is based on the assumption that the bearded dragon reaches its standard expected size of 40 cm from snout to vent.

US gallonsInches L x D x HMeets Minimum Requirements
3730 x 12 x 22No, wide but not deep enough
40 (breeder)36 x 18 x 16No, wide but not deep enough
4536 x 13 x 24No, wide but not deep enough
5036 x 18 x 19No, wide but not deep enough
5548 x 13 x 21No, wide but not deep enough
6537 x 18 x 24No, wide but not deep enough
9048 x 18 x 24No, wide but not deep enough
12049 x 24 x 24Yes
13572 x 18 x 24No, wide but not deep enough
15060 x 24 x 24Yes
18073 x 25 x 26Yes
20096 x 24 x 20Yes

This should now complete the answer to the question asked earlier in this article “are glass tanks good for bearded dragons”. With the minimum housing size in mind based off the Codes of Practices and the pros and cons given earlier, glass tanks are not a great option.

3. Selecting and setting up lighting and heating

bearded dragon basking under uvb light Pogona minor minor
Pogona minor minor basking under UVB light, UVA basking lamp and ceramic heat emitter.

There are many options available on the market for bearded dragon lighting and heating however, not all are suitable. Since the lighting and heating can be quite expensive and the pet industry has almost no regulation over it, it is vital to understand what you are buying before handing over the money, especially since you will be the one paying the vet bills if it isn’t right.

There is no room to skimp on the best lighting and heating. However, providing your bearded dragon a house out in the sunshine will go a long way to compensate for mistakes in UVB lighting.

Note: The article on Setting up Heating and Lighting answers the question “how do I setup my bearded dragon lights” in depth.

3.1 What lights do i need for bearded dragon?

When selecting heating and lighting keep in mind that you are replicating the sun. Everything is brought together to focus in one place, the basking spot.

Note that lights should not connected to a thermostat heating control. Lights will constantly turn on and off as the thermostat switches things on and off to control the temperature. However, thermostats often have day and night timing controls with the lights can be connected to.

The heating and lights you need for your bearded dragon are:

  • UVA light (day time only)
  • UVB (day time only)
  • Ceramic heat emitter (CHE) (day and night)
different lights for bearded dragon house lighting
Fluorescent tube, fluorescent coil and mercury vapor bulb.
UVA lights

UVA lights are often referred to as a basking bulb. They provide additional light to brighten the basking area and can encourage natural behaviours. UVA lights often add to the heat.

They do not produce UVB light and aren’t intended to. Basking bulbs are essentially the same light you have in your home only the packets have pictures of reptiles. At least the old incandescent lamps which get very hot.

UVA lights may not be necessary if the area is already warm and well lit however it would be safer to err on the side of caution and provide a UVA light.

Clear bulbs can be quite blinding to look into, frosted bulbs may be best.

For warm climates a 50 watt basking bulb may be sufficient whereas in cooler areas a higher wattage may be needed such as 100 watt. Again, a couple of different wattages on hand will make it easy to adjust the temperature.

Frosted uva basking bulb for bearded dragon habitat
UVB Lights

Use either the  mercury vapor bulb or fluorescent strip light.

Mercury vapor bulbs have the best reputation when it comes to UVB lighting but the fluorescent strip lights are another way of providing UVB. The strip lights are not the same as the compact UVB lights. For more information on compact UVB lights see the article Setting up Heating and Lighting.

Mercury vapor bulbs get very hot adding to the environments warmth, useful during colder periods. Mercury vapor lights can be expensive but have a good reputation for quality output.

Fluorescent strip lights put out minimal (insignificant) amount of heat.

There are many fluorescent strip lamps available on the market. For example, the 22″ Zoo Med 26061 Reptisun 10.0 T5-Ho Uvb 24W Fluorescent Lamp which can be fitted into the 24″ Zoo Med or Reptisun T5 Ho Terrarium Hood. If you can get the Arcadia range then the D3 fluorescent lamp is their best strip light which you can see on their website here.

If it takes days or more between ordering and receiving a new bulb then a spare should be kept for unexpected mishaps.
Do not get compact fluorescent lights.

Mercury vapor lighting for bearded dragon housing
Ceramic Heat Emitter (CHE)

Ceramic heat emitters (CHE) only produce heat, they do not produce light. This makes them ideal for heating 24/7.

CHEs should be connected to a thermostat.

CHEs are quite cheap. Purchase a small range of wattages to cover different seasons and to keep spares. For example, a low 60 watt CHE and a higher 100 watt may be adequate for most set ups particularly if there is support heating from the basking bulb. Colder areas may need to go higher such as to a 150 watt. However, rather than having one high wattage CHE which will result in a very small zone of heat, run two lower wattage. For example, rather than having a single 150 watt CHE, try two 50 watts or a combination of a 50 watt and a 75 watt.

The shape of the CHE determines how the heat will be distributed. A flat surfaced CHE will distribute heat uniformly downwards over the area it is focused on. A concave shaped CHE provides a radiant type of heating and convex is for a wide area.

The flat CHE is probably about the best shape for reptile setups as it will focus the heat downwards more than the other shapes.

The color of CHE doesn’t make a difference to anything.

ceramic heat emitter CHE
Ceramic heat emitter (CHE). Provides heating for bearded dragon housing without emitting light.
Lamp Covers and Reflectors
twin lamp reflector
Twin lamp reflector suitable for a UVA basking bulb and Mercury Vapor bulb.

Lamp covers will be needed for the lights and CHE. Light bulbs create a lot of light but the light is only useful when diverted in the direction it needs to go. A well designed lamp holder with a suitably reflective surface can increase the light output significantly which improves efficiency and effectiveness.

Lamp holders and reflectors allow us to focus the light in the desired direction increasing the quantity of useful light.

In Arcadia’s post The Importance of Lamp Reflectors they recommend using a highly polished and dimpled reflectors for the lamps to get the best results. 

Lamp cover for reptile lighting
Single lamp, reflective cover for bulbs.

Purchase a lamp cover that will take the highest wattage bulb that you will ever use in it. Lamp sockets are designed to cope with up to a certain level of heat. So don’t put a 150 watt bulb in a 100 watt lamp. Getting a lamp that cannot take the wattage of the bulb will likely result in the bulb burning out and could have far worse consequences such as setting on fire.

Lamps generate a lot of heat which presents dangers. Buy quality fittings rated for the bulb wattage you intend to use in it. Install a fire alarm near the enclosure for additional peace of mind.

Fire 9 Prevention

Heat Lamps Used To Keep Pets Warm Spark 3 House Fires

Lamp covers can come with mesh covers, for any bulb that will not be in a reflector cover use a mesh guard to prevent burns.

mesh guard for bearded dragon lighting
Mesh guards help prevents burns.

If you are building your own enclosure then you will have more lighting and heating options, see the article DIY Enclosures.

bearded dragon basking under lamp with mesh cover
Bearded dragon basking under a mercury vapor bulb with wire mesh guard. Dark space which would improve by adding UVA lighting.

3.2 Lights you Don’t Need

Do bearded dragons need blue light? No bearded dragons do not need blue lights.

Do bearded dragons need red light at night? No bearded dragons do not need red lights at night nor in the daytime.

bearded dragon does not need red light
Bearded dragons do not need red light at night or in the day.

3.3 Can I use a Heat Mat for my Bearded Dragon?

Heat mats can be used for bearded dragons however, bearded dragons naturally should be basking in the light and heat radiating down rather than heat radiating upwards.

Heat mats can have hot spots which may cause burns and the thermostats built into the heat mats are often of poor quality.

If additional heating is required in very cold climates then heat pads designed for humans may be used underneath the enclosure. The thermostats are superior to those put in pet products and likely to be more reliable.

Heat pads for humans are usually designed for pain relief and not usually waterproof so it is best that they do not come in direct contact with the reptiles environment. Chock up the housing off whatever it rests on and place the heat mat underneath.

Some of the heat pads for humans are set to automatically turn off after a set period of time.

3.4 Understanding the Factors Influencing Wattage Needed

Factors that influence the wattage (size of lamps) for the heating and lighting include:

  • The dimensions of the housing
    • How tall, wide and deep is the house?
  • What the housing is made of
    • Does the material have insulating properties such as wood or is it glass?
    • How much ventilation is available? This will impact air circulation and loss of heat.
  • The number of animals being housed in the same environment
    • Where a pair of bearded dragons are housed together additional basking spots will be required to prevent competition.
  • The climate.
    • If you live in a cold climate and your house is not temperature controlled then the enclosure will require significantly more heating to attain the required temperature.

3.5 Examples on How to Setup Bearded Lights and Heating

Mercury vapor UVB lamp with a UVA basking light and ceramic heat emitter
Bearded dragon habitat lighting setup with mercury vapor lights
Bearded dragon habitat lighting setup with mercury vapor lights

Lights such as the Zoo Med PowerSun UV Mercury Vapor Lamp are common to use.

The 100 watt Arcadia D3 UV Basking Lamp has a lifespan of 6000 hours which is great for UVB lights.

Always have a spare UVB bulb. They never break at convenient times.

Remember to check the manufacturer’s instructions for the placement of the bearded dragon light setup (distance between the animal and the light). Arcadia recommend for these bulbs 20-30 cm between the light and the bearded dragon.

Fluorescent UVB strip lamp with a UVA basking light and ceramic heat emitter
Bearded dragon habitat lighting setup with fluorescent strip light
Bearded dragon habitat lighting setup with fluorescent strip light

The fluorescent strip light should only cover one third to half of the habitat.

There is no need to cover the entire enclosure with lighting. Just as bearded dragons need the opportunity to get into the light, they need the opportunity to get out of it. Bearded dragons are quite capable of knowing when they need to bask, soaking up UVB and when they need to move out of it.

3.6 Does my Bearded Dragon House need a Thermostat?

Your bearded dragons house does need a thermostat. Thermostats provide a granularity to controlling the heat that cannot be performed so well manually.

During the day and night the thermostat will turn heating on and off maintaining the temperature within a few degrees of the desired level.

Do not connect lights to thermostats heat control, they will turn on and off all day and night as the thermostat controls the temperature. However, thermostats will often come with timers in addition to temperature control which lights can be plugged into so that the lighting cycles are automatically maintained.

Which thermostat to get is the trick. Some of them have a knack at going off at 3am in the morning when the environment temperature drops to low because it failed to kick in the heating in a timely manner. A little research before purchasing may uncover a reasonable thermostat at a good price.

4. Monitoring for the Environment

Heat and moisture in the environment is measured using thermometers and hygrometers.

A minimum of 2 thermometers and 1 hygrometer should be set up in the habitat.

One thermometer is placed in the basking spot and the other in the cool area. This will provide the information you need to manage the temperature gradient that needs to be provided. For information on positioning thermometers and setting up probes go to the lighting and heating post.

Thermometers are cheap so installing multiple thermometers will provide for better management of the environment. Analog thermometers are often reliable. Putting a digital thermometer in the habitat as well can be useful.

Don’t use the flat tape style thermometers designed for sticking on aquariums.

Digital laser infrared thermometer temperature guns are a great gadget, but they are not as good as simply walking past your enclosure and noticing the temperatures registered on analogue or digital thermometers.

The placement of a hygrometer is a little more forgiving. Generally it should be place centrally in the habitat. For further information on setting up hygrometers go to Complete Guide to Humidity for Bearded Dragons.

thermometer and hygrometer bearded dragon habitat
Hygrometer and thermometer monitoring the habitat.

5. The Best Flooring for Bearded Dragons

See the article Best Substrate for Bearded Dragons.

6. Accessories

What furniture do i need for my bearded dragon?

The basic accessories or furniture you need for your bearded dragons house are:

  • Rocks
  • Branches
  • Burrow
  • Vines (optional)
  • Bowls

Natural accessories are easily sourced and can provide much enjoyment.

The placement of the accessories is key to how well the habitat will stimulate natural behaviours which in turn reduces stress and improves health.

How to set up bearded dragon tank
Setting up housing for pair of bearded dragons (Pogona minor minor)

In addition, the benefits of having an aesthetically pleasing environment for humans to look at can make it quite enjoyable to just watch or interact with it.

A combination of rocks, branches and vines can create perches, basking platforms and hiding spaces. Carefully placed accessories can ensure the full use of much of the cage space and will enable the bearded dragon to settle exactly where it wants to, making the most of the available heating and lighting as it chooses to.

For more information on setting up furniture and accessories for your bearded dragon see the article Accessories and Environmental Enrichment.


Leave a Comment

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.